Voltage Meter
AC Outlet
Engine Switch
ON
OFF
Circuit
Protector
AC
DC
ON
OFF
For Charging Battery Only
- DC 12V 8A +
16
Owner’s Manual
Operation
NOTE: THE PARTS LISTED ABOVE ARE HELPFUL FOR LOCATING THE
CONTROLS MENTIONED BELOW.
CAUTION: PRIOR TO FIRST USING THE GENERATOR, THE ENGINE MUST BE
FILLED WITH OIL OF A HIGH QUALITY SAE 10W-30 GRADE ENGINE OIL.
TO DO SO, UNSCREW AND REMOVE THE ENGINE’S OIL DIPSTICK LOCATED
AT THE BOTTOM OF THE ENGINE CRANKCASE. FILL THE ENGINE’S
CRANKCASE UNTIL THE OIL LEVEL IS LEVEL WITH THE UPPER MARKED
LINE ON THE DIPSTICK. THEN SCREW THE DIPSTICK BACK INTO
THE OIL FILL HOLE.
Pull Start
Outlet
Voltage Meter
Circuit Breaker
Oil Fill
Pull Start:
Manual start.
Oil Fill:
To check and fill oil.
Voltage Meter:
Measures voltage
Outlets:
Plugs for appliances, etc.
Circuit Breaker:
Breaker for outlets incase of overloads.
DC Charging Poles:
Used for charging batteries only.
Choke:
Used for cold starting the generator.
Fuel Valve:
To allow fuel to the engine.
DC Charging Poles
Fuel Tank
Fuel Valve
Choke
