20
Owner’s Manual
Operation (cont’d)
The 12 Volt DC terminals are only for charging batteries
1. Connect battery cables (not included) from generator to battery.
CAUTION: MAKE SURE TO CONNECT THE POSITIVE (+) LEAD OF THE
POWER CORD TO THE POSITIVE (+) TERMINAL ON THE GENERATOR,
AND CONNECT THE NEGATIVE (-) LEAD OF THE POWER CORD TO THE
NEGATIVE (-) TERMINAL ON THE GENERATOR.
3. Start and run the engine as described above
4. When finished using the generator, turn the engine power switch to its “OFF” position. Turn
the fuel valve to its “OFF” position.
6. After the engine and generator have completely cooled, store the generator in a safe, clean, dry
location (if not already installed in one).
AC Outlet
Circuit
Prot
ector
AC
DC
ON
OFF
For C
harging B
atter
y Only
- DC 12V 8A +
