background image

6

 

1-2 CHARACTERISTIC   

 

• The GWL-2400P is wireless LAN adapter cards that prov ide wireless connection 

between computers. 

• The GWL-2400P is designed to operate with IEEE 802.11 (wireless LAN 

International Standard) wireless compliant radio cards and uses a CSMA/CA 

(Collision Sense Multiple Access with Collision Avoidance) algorithm  as the 

media access scheme, which makes high speed communication (with minimal 

collision probability) possible. 

• The GWL-2400P supports DSSS (Direct Sequence Spread Spectrum) physical 

layer. This is a radio technique, which scrambles the data prior to transmission 

and uses a correlation technique on receiver to improve the signal to noise ratio 

and makes it possible to communicate  in the office having a wall and a 

compartment. 

• The GWL-2400P for Notebook PC is small and portable as a roaming function is 

provided for users who need network services while maintaining mobility.   

• The GWL -2400P  has an LED (Light Emitting Diode ) on the part of the card.   

• The yellow LED will illuminate when the power is supplied and the card is 

inserted properly. 

• The GWL-2400P support various network software. The network driver is 

provided to support network software such as Windows 95(OSR2)/98, and 

Windows NT 4.0. 

 

 

1-3   COMPOSITION 

 

• Link -i LAN CARD (PC Card Type II, PCMCIA V 2.1, JEIDA 4.1) 

• Installation CD 

• Manual   

 
 
 
 
 

Summary of Contents for GWL-2400P
















Reviews: