All features of the MaxFire Fusion V4 have an advanced management option that
allows you to disable them. This is especially useful if you find there are features you
do not use and do not want the possibility to accidentally activate the feature.
Enter (AFM)
To enter the advanced feature management you must have the controller ON and
the rapid fire must be turned OFF. Then HOLD the
“RIGHT T LEFT TRIGGER
+ B + Y + X”
together all at the same time for 7 seconds. After 7 seconds you will see
both player 3 and 4 LEDs flash 10 times very fast. After this you can release all of the
buttons.
Managing features
Now that you are in the AFM you can enable or disable any of the features listed
below by just tapping the corresponding button. When you tap one of the buttons
you will see the player 4 LED flash either 1 or 2 times.
1 flash = Feature is now ENABLED, 2 flashes = Feature is now DISABLED
.
•
Jump Shot
•
Drop Shot
•
Fast Reload
•
Jitter Fire
•
GOW Reloads
•
Sniper Breath
•
Quick Scope
•
Feature Activation
This option changes which buttons will be used to activate features. There
are 3 options, left only, mod button only or both. The default setting is
both. When changing you will see the player 3 LED flash for left only, the
player 4 LED flash for mod button only or both LEDs flash for Both buttons.
Exit Advanced Feature Management
To exit AFM TAP
“UP
” on the D-pad. You will again see the player 4 LED
flash 10 times very quickly.
Advanced Feature Management
HOLD
+
HOLD
+
+
+
(7 sec)
•
Rapid Fire
•
Auto Run
•
Auto Aim
•
Mimic
•
Battlefield Spotting
•
LED Notification
•
Competition Mode
+
+
+
+
Pg. 9
