Genius Scanner
15
!
Make sure the film is properly loaded into the film holder and the film holder is correctly
positioned on the scanner glass.
!
Make sure the proper SCAN SOURCE and SCAN SIZE are selected before proceeding the
scanning task.
!
It is recommended to use a higher resolution (such as 600dpi for 35mm films, or 300dpi for
120/220 films) when you proceed the film scanning task to prevent the scan images from
losing the quality while you enlarge the size of the images.
Scanner Utility Program
The Scanner Utility Program can help you get your new scanner up and running. In addition, it
contains a number of other features to help you tailor and control the scanner.
Most significantly, the Scanner Utility Program checks to make sure that the scanner software is
properly installed and the scanner and computer are communicating with each other.
Two other features of the Scanner Utility program are
the scanning lamp controls
and
the
scanning position alignment utility
. The Scanner Utility allows you to turn the scanning lamp on
and off, and define an idle time for the scanning lamp to automatically turn itself off. Also, it allows
you to define the exact position on the scanning glass where scanning will begin. The scanner
lock was designed to hold the scanning lamp in place during shipping, but some refinement of the
initial scanning position may still be necessary.
Turn Lamp
On/Off
Verify
Scan
Alignment
Position
Alignment
Source
Alignment
Window
