Quick start steps
1. Preparing Sim card - Ensure the Sim card is activated that you can send
sms , Add sms pack , Insert the sim card in sim card slot
2. Connect the antenna
3 Connect Input power supply (Switch position to be check)
- 3PHASE RYB for 3phase Mode (3phase mode)
- Connect adapter 12v/ 2 amps for 1ph mode (1ph mode)
4. Check Status LED to check Network is connected or not
1sec On / 1sec Off Blink - Network Not connected
Continues ON - Network Connected
5. Once the network is connected Then send SMS commands
How to Program the Gsm motor control and test !
1. Check Before sending sms , Netwrok is connected , Status Led
should be stable and continues ON
2. Then Store the Mobile No using command - send sms - C
3. To check status send SMS - 7 - status will be recived thru sms
4. To on the motor you can send SMS 1 for ON / 2 For OFF
5. Pump Control By calling -
To pump ON - Call to the sim No after 5 rings call will be disconnected
To Pump OFF- Call to the sim No after 3 rings Call will be disconnected
