![background image](http://html1.mh-extra.com/html/genius/gm56pci-sm/gm56pci-sm_user-manual_2212993007.webp)
2. Select Start.
3. Select Programs-->Accessories-->HyperTerminal.
4. Double click the Hypertrm.exe icon.
5. Optionally, select a connection name and icon.
6. In the Connect Using window, select Motorola GM56PCI-SM...... modem. Click OK.
7. Enter a number in the Phone Number box...any number since we will not be dialing it. Click
OK.
8.On the next screen select Cancel.
9. Enter AT and hit <Enter>.
The response OK should appear.
10. Enter ATS46 = 23 and hit <Enter>.
11. Enter AT&T1 and hit <Enter>. Wait a few seconds.
12. Type some letters at the keyboard. If the hardware is functioning correctly, the letters you type
appear on the HyperTerminal display.
13. To exit this test mode, type +++ in quick succession (note no carriage return) to escape to
command mode, then type ATH <Enter>.
9
Changing the Operating System
The GM56PCI-SM Modem software is the same for Windows 95 and Windows 98. If the modem
is installed on Windows 95 and you upgrade to Windows 98, the GM56PCI-SM will continue to
function as before. No new drivers are required.
However, if you change from Windows 95 or Windows 98 to Windows NT you must get a new set
of drivers for that operating system. The GM56PCI-SM modem software for Windows 9x will not
work under Windows NT. Contact your direct modem vendor or PC supplier for drivers, or visit
their Web sites.
10
Using the GM56PCI-SM Modem
DOS-Based Applications and Games
Importnt: DOS box support is disabled after the GM56PCI-SM is installed. After install is
complete, you must enable it via the Advanced tab in the GM56PCI-SM Control Panel application
(Start->Settings->Control Panel, then double-click the GM56PCI-SM Modem icon). Make sure
the DOS box check box is checked. If not, click it to check it, exit the GM56PCI-SM Control
Panel application and restart the computer. You must restart the computer to complete DOS box
enabling.
The GM56PCI-SM can be used by DOS applications only through a Windows 95/98 DOS box.
Win 9x DOS box support is achieved by virtualizing the standard I/O and IRQ assigned to a COM
port. This means that the GM56PCI-SM drivers capture and redirect all I/O to/from the standard
I/O address for the COM port to which it assigned. In simpler terms, you tell the application the
COM port that the GM56PCI-SM modem is installed on, and then use all the standard I/O and
IRQ settings. Standard I/O addresses and IRQs for COM Ports 1-4 are as follows: