English
-19-
1.
Plug the AC power adapter into the “
DC IN 5V
” terminal of the digital video camera.
2.
Insert the other end of the AC power adapter into a wall outlet.
The battery charge LED lights red when charging is started and goes off when
charging is completed.
It is recommended that the battery be fully discharged before being recharged.
Charging time varies according to the ambient temperature and the status of
battery.
NOTE
This digital video camera must be used with the specified AC power adapter. Damage
caused by the use of an incorrect adapter is not covered under the warranty.
Always make sure that the digital video camera is off before removing the battery.
The battery may feel warm after it has been charged or immediately after being used.
This is normal and not a malfunction.
When using the digital video camera in cold areas, keep the digital video camera and
its battery warm by holding it inside your jacket or other warm protective environment.
If you open the battery cover without removing the battery, the power will not be
terminated.
If you remove the battery, you must insert the (charged) battery within two hours in
order to make sure that the date and time will not be reset.
Using the AC Power Adapter
Using an AC power adapter prevents the digital video camera from automatically
powering off while transferring files to your computer.
Note also the steps in the preceding section “Charging the Battery”.
