Genius DV1210, Manual

Page: 12 / 70

English
-12-
Charging the Battery
Using the charger may charge the battery or operate the
camera as power supply. Make sure that the power of the
camera is off and then insert the battery before starting.
1. Place the battery in the charger.
2. Connect the power adaptor to a wall outlet.
„
Charging time differs depending on the ambient
temperature and the status of battery.
Inserting and Removing a SD Card
The Digital Video Camera comes with 32 MB built-in memory, which allows you
to store pictures, movies, recorded voice and music. You can expand the
memory capacity by using an optional SD or MMC memory card up to 2GB. To
insert a memory card, refer to the figure below and:
1. Open the battery/SD card cover.
2. Insert the memory card until it locks into position.
To remove an installed SD card, press the card inwards to release it. When
the card pops out, gently remove it from its slot.
NOTE
„
When the memory card is inserted in the digital video camera, please turn
off the camera beforehand and then turn on the camera after inserting the
memory card. The built-in 32MB memory will be automatically disabled.
After restarting, do not remove or insert the memory card to prevent loss
and damage of data on memory card and built-in memory.