Genius DV1210, Manual

Page: 11 / 70

English
-11-
Section 2
How to use digital video camera
Loading the Battery
Before using the Digital Video Camera,
you must load a NP60 rechargeable
Li-ion battery.
1. Follow the arrow direction and slide
to eject the battery / SD cover.
2. Face the battery up with letter side
upward. Follow the battery injection
direction according to the correct
polarity marks ( + or -) and plug the
battery into the Digital Video Camera. Close the battery/SD Card Cover firmly.
Removing the Battery
Open the battery/SD card cover and when the battery has come out a little;
slowly pull it out the rest of the way.
NOTE
„
Always make sure that the digital still camera is off before removing the
battery.
„ The battery may feel warm after it has been charged or immediately after
being used. This is normal and not a malfunction.
„ When using the digital video camera in cold environments, keep the digital
video camera and its battery warm by holding it inside your jacket or other
warm protective environment.
„ The power of battery can not be charged through the digital video camera.
You need to remove the battery from the camera first and then follow the
steps above to charge it in addition.