17
Auto Scanning Setting
Auto scanning Setting is a fully automatic function, which enables
you to complete a scanning process at your fingertips. By checking
the “Enable auto scanning” option in the Auto scanning setting
area, the auto scanning function is empowered. Please note that the
default settings for Auto scanning setting are shown as follows.
The steps for auto scanning are:
1. Locate the auto scan button which is situated in the front panel
of the scanner.
2. Push the button. The scanner will start the scanning process.
3. If you check the “Prescan” box, it first makes a preview
scanning and displays the scanned image in the preview
window. (If the “Prescan” box is not checked, you can omit
steps 3 & 4.)
4. The scanner performs the auto area detect function (please first
check the “Area detection” option) to define the actual area of
your scanned image in the preview window. Later, this defined
area will be used for final scanning.
5. The final scanning starts to run and the scanned result will be
sent to the destination (e.g., File, Application, Mail, Clipboard,
Fax or Disk), which depends on your choice. For the purpose of
performing this step, please ensure that the “Scan and send to
destination” option is checked. (If the “Scan and send to
destination” is not checked, the scanning process will stop at
step 4.)
Default
Setting
Summary of Contents for COLORPAGE VIEW PRO
Page 1: ...1...