BLIZZARD 500-900
12
532102 - Rev.B
10
14
90
8-18
30
11
2x17
0 1
2
3
4 5
6
12
50
328
172
1
Tr
ansla
tion of the original instruc
tions
ENGLISH
5.3 BASE PLATE
RISKS
PERSONAL PROTECTIVE EQUIPMENT
Before proceeding, check that the necessary conduits are in place (§
4.3-
5
).
The base plate and corresponding hardware are accessories which are
not included.
1. Assemble the base plate as shown in
11
; tighten the supplied
M10 nuts and locknuts, using two hex spanners.
2. Pour a slab, with reference to
6
and
7
in § 5.2 and
12
.
3. Take the cable conduits out from the hole (
12
-1) and install
the base plate.
Do not bury the base plate in the concrete.
4. Use a spirit level to check that the slab is horizontal, making any
corrections before the concrete goes off (
12
).
5.4 FASTENING THE GEAR MOTOR
RISKS
PERSONAL PROTECTIVE EQUIPMENT
Wait for the concrete to cure fully before proceeding.
!
Lift the gear motor, holding it by the base.
1. Pass the cables through the two holes on the gear motor (
13
-1).
2. Position the gear motor, lining up the slots and the screws on the
plate (
13
-2).
3. Pass the cables through the supplied cable glands, then insert the
cable glands in the holes (
13
-3).
!
If one of the two holes will not have cables running through it, insert
the plastic cable gland whole.
Foundation
Steel rack
