Operator's Manual
Second Edition • Third Printing
Specifications
78 ZX
®
-135/70
Part No. 1272822GT
Specifications
Model
ZX-135/70
Height, working maximum
141 ft
43.15 m
Height, platform maximum
135 ft
41.15 m
Height, stowed maximum
10 ft 1 in
3.1 m
Horizontal reach, maximum
69 ft 9 in
21.3 m
Width, axles retracted
8 ft 2 in
2.5 m
Width, axles extended
12 ft 11 in
3.94 m
Length, stowed
42 ft 5 in
12.9 m
Maximum load capacity
600 lbs
272 kg
Maximum wind speed
28 mph 12.5 m/s
Wheelbase, axles extended
13 ft 6 in
4.11 m
Wheelbase, axles retracted
13 ft 6 in
4.11 m
Ground clearance
1 ft 3 in
38 cm
Turning radius, axles extended
Inside
9 ft 6 in
2.9 m
Outside
20 ft 3 in
6.17 m
Turning radius, axles retracted
Inside
26 ft 4 in
8.03 m
Outside
32 ft 8 in
9.96 m
Turntable rotation (degrees)
360° continuous
Turntable tailswing,
secondary boom lowered
14 ft
4.3 m
Turntable tailswing,
secondary boom raised
2 ft 8 in
0.81 m
Controls
12V DC Proportional
Platform dimensions, 6 foot
(length x width)
72 x 30 in
183 x
76 cm
Platform dimensions, 8 foot
(length x width)
96 x 36 in
244 x
91 cm
Platform leveling
self-leveling
Platform rotation
160°
AC outlet in platform
Standard
Fuel tank capacity
40 gallons
151 liters
Hydraulic pressure, maximum
(boom functions)
2,900 psi
203 bar
Hydraulic pressure, maximum
(emergency power unit)
3,100 psi
218 bar
System voltage
12V
Tire size
445/65 D22.5 or
445D50/710, 18 ply FF
Weight
46,500 lbs
21,092 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Ambient operating
temperature
-20° F to 120° F
-29° C to 49° C
Note: Low end of temperature range requires the use of
special hydraulic and engine oils.
Airborne noise emissions
Sound pressure level at ground workstation
<88 dBA
Sound pressure level at platform workstation
<74 dBA
Guaranteed sound power level
107 dBA
Total vibration value to which the hand/arm system is
subjected does not exceed 2.5 m/s
2
.
Highest root mean square value of weighted
acceleration to which the whole body is subjected does
not exceed 0.5 m/s
2
.
Maximum slope rating, stowed position, 4WD
Counterweight uphill
45% 24°
Counterweight downhill
30% 17°
Side slope
25% 14°
Note: Slope rating is subject to ground conditions with
one person in the platform and adequate traction.
Additional platform weight may reduce slope rating.
Drive speeds
Drive speed, stowed
3.0 mph
40ft/9.1 sec
4.8 km/h
12.2 m/9.1 sec
Drive speed, raised or
extended
0.7 mph
40 ft/40 sec
1.1 km/h
12.2m/40 sec
Drive speed, raised and
extended
0.4mph
40 ft/68 sec
0.6 km/h
12.2 m/68 sec
Floor loading information
Tire load maximum
27,250 lbs
12,360 kg
Tire contact pressure
130 psi
9.13 kg / cm
2
896 kPa
Occupied floor pressure
209 psf
1,019 kg / m
2
9.99 kPa
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
Summary of Contents for ZX-135/70 with Jib-Extend
