Genie ZX-135/70 with Jib-Extend, Operator'S Manual

Page: 64 / 82

Operator's Manual Second Edition • Third Printing
Operating Instructions
62 ZX
®
-135/70 Part No. 1272822GT
Example:
Piece of wood = 144 inches (3.6 m)
Run = 144 inches (3.6 m)
Rise = 12 inches (0.3 m)
12 in ÷ 144 in = 0.083 x 100 = 8.3% grade
0.3 m ÷ 3.6 m = 0.083 x 100 = 8.3% grade
If the slope exceeds the maximum slope or side
slope rating, then the machine must be winched or
transported up or down the slope. See Transport
and Lifting section.
Tilt Sensor Activation Settings
Chassis Angle (front
to back)
Max Height Max Reach
5°
126 ft
38.4 m
71 ft
21.6 m
2°
135 ft
41.1 m
70 ft
21.3 m
When the Machine On Incline
indicator light is on and the tilt
alarm sounds, the following
functions are affected; drive
functions are disabled.
Follow the Boom lowering
procedure (see Operating
Instructions) to restore drive
function.
When the machine is stowed, on
a slope, and the tilt alarm sounds,
the following functions are
affected; lift functions are
disabled.
Return the machine to level
ground to restore lift functions.