Genie ZX-135/70 with Jib-Extend, Operator'S Manual, Page: 68 / 82

Operator's Manual Second Edition • Third Printing
Operating Instructions
66 ZX
®
-135/70 Part No. 1272822GT
LCD Screen (if equipped)
The LCD screen displays hour meter, voltage, oil
pressure and coolant temperature. The screen
also displays fault codes and other service
information.
Perkins Engine
Machines equipped with Perkins 854F-34T Diesel
engines have a regeneration mode that should run
automatically when needed.
LCD will display REGEN FORCED and WARNING
HIGH EXHAUST SYSTEM TEMP when the
regeneration mode is running. No service required.
Aircraft Protection Package (if equipped)
If the platform bumper comes
into contact with an object, the
machine will shut down and no
functions will operate.
1 Start the engine.
2 Press down the foot switch.
3 Move and hold the aircraft
protection override switch.
4 Move the appropriate
function control handle or
toggle switch to move the
machine away from aircraft
components.
Machine Not Level Indicator Light
If the tilt alarm sounds when the
platform is raised, the Machine Not
Level indicator light will come on
and the drive function in one or
both directions will not operate.
Identify the condition of the boom
on the slope as shown below.
Follow the steps to lower the boom
before moving to a firm, level
surface. Do not rotate the boom
while lowering.
If the tilt alarm sounds
with the platform uphill:
1 Lower the primary
boom.
2 Lower the secondary
boom.
3 Retract the primary
boom.
If the tilt alarm sounds
with the platform
downhill:
1 Retract the primary
boom.
2 Lower the secondary
boom.
3 Lower the primary
boom.