Operator's Manual
Second Edition • Second Printing
42
Z-40/23N • Z-40/23N RJ
Part No. 1258834
Model
Z-40/23N
Height, working maximum
14.2 m
Height, platform maximum
12.3 m
Height, stowed maximum
1.2 m
Horizontal reach maximum
6.9 m
Width
1.5 m
Length, stowed
6.6 m
Maximum load capacity
227 kg
Maximum wind speed
12.5 m/s
Wheelbase
2.0 m
Turning radius (outside)
3.3 m
Turning radius (inside)
89 cm
Turntable rotation
355°
Turntable tailswing
11.4 cm
Jib rotation, vertical
135°
Power source
8 Group 903, L-16,
6V 390AH Batteries
Drive speed, stowed
6.0 km/h
Drive speed,
1 km/h
booms raised
12.2 m/45 sec
Maximum inclination
of chassis
refer to serial label
Airborne noise emissions
73 dB
Maximum sound level at normal operating workstations
(A-weighted)
Total vibration value to which the hand/arm system is
sujected does not exceed 2.5 m/s
2
Highest root mean square value of weighted
acceleration to which the whole body is subjected does
not exceed 0.5 m/s
2
Ground clearance, minimum
16.5 cm
Controls
24V DC proportional
Weight
6908 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Platform dimensions, 4 foot
(length x width)
1.2 m x 76 cm
Platform dimensions, 5 foot
(length x width)
1.4 m x 76 cm
Platform leveling
self-leveling
Platform rotation
180°
AC outlet in platform
standard
Hydraulic pressure, max
186 bar
(boom functions)
System voltage
48V DC
Tire size - steer tires
22 x 7 x 17.5
Lug nut torque (dry)
169 Nm
Lug nut torque (lubricated)
127 Nm
Tire size - non-steer tires
26 x 7 x 22
Lug nut torque (dry)
169 Nm
Lug nut torque (lubricated)
127 Nm
Maximum slope rating, stowed position
Platform downhill
30% (17°)
Platform uphill
20% (11°)
Side slope
25% (14°)
Note: Slope rating is subject to ground conditions and
adequate traction.
Floor loading information
Tire load, maximum
3583 kg
Tire contact pressure
14.0 kg/cm
2
1379 kPa
Occupied floor pressure
1816 kg/m
2
17.8 kPa
Note: Floor loading information is approximate and
does not incorporate different option configurations. It
should be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
Specifications
