Part No. 1258834
Z-40/23N • Z-40/23N RJ
19
Operator's Manual
Second Edition • Second Printing
Platform Control Panel
1 Horn button
Push the horn button and the horn will sound.
Release the horn button and the horn will stop.
2 Used for optional equipment
3 Secondary boom up/down
switch
Move the switch up and the
secondary boom will raise.
Move the switch down and
the secondary boom will
lower.
4 Platform level switch
Move the platform level
switch up and the level of
the platform will raise. Move
the platform level switch
down and the level of the
platform will lower.
5 Jib boom up/down switch
Move the switch up and the jib
boom will raise. Move the
switch down and the jib boom
will lower.
6 Platform rotate switch
Move the platform rotate
switch to the right and the
platform will rotate to the
right. Move the platform
rotate switch to the left and
the platform will rotate to the left.
7 Z-40/23N RJ: Jib rotate switch
Move the jib rotate switch to
the right and the jib will move
to the right. Move the jib
rotate switch to the left and
the jib will move to the left.
8 Auxiliary power switch with cover
Use auxiliary power if the primary power source
fails.
Simultaneously hold the auxiliary power switch
on and activate the desired function.
9 Platform overload indicator light
Light flashing indicates the platform is
overloaded and no functions will operate.
Remove weight from the platform until the light
goes off.
10 Machine not level indicator light
Light flashes when the platform is raised and the
machine is on a severe slope. The drive
function in one or both directions will not
operate.
11 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions. Pull out the red
Emergency Stop button to the on position to
operate the machine.
12 Proportional control handle for drive function and
thumb rocker for steer function
Move the control handle in the direction
indicated by the blue arrow on the control panel
and the machine will drive forward. Move the
control handle in the direction indicated by the
yellow arrow and the machine will drive
backwards.
Press the left side of the thumb rocker and the
machine will steer to the left. Press the right
side of the thumb rocker and the machine will
steer to the right.
13 Boom function speed controller
Turn the dial to increase or decrease the speed
of the machine functions.
14 Drive enable indicator light
Light on indicates that the boom has moved just
past either non-steer wheel and drive function
has been interrupted.
Controls
