Part No. 1258834
Z-40/23N • Z-40/23N RJ
31
Operator's Manual
Second Edition • Second Printing
Emergency Stop
Push in either the ground or platform red
Emergency Stop button to the off position to stop
all machine functions.
Repair any function that operates when the red
Emergency Stop button is pushed in.
Selecting and operating the ground controls will
override the platform red Emergency Stop button.
Auxiliary Controls
Use auxiliary power if the primary power source
fails.
1 Turn the key switch to ground or platform
control.
2 Pull out the red Emergency Stop button to the
on position.
3 Press down the foot switch when operating the
auxiliary controls from the platform.
4 Break the security tie and lift the cover.
Note: If the security tie is broken or missing,
consult the appropriate Genie service manual.
5 Simultaneously hold the auxiliary
power switch on and activate the
desired function.
The drive function will not operate with
auxiliary power.
Operation from Ground
1 Turn the key switch to ground control.
2 Pull out the red Emergency Stop button to
the on position.
Operating Instructions
To Position Platform
1 Hold the function enable switch to
either side.
2 Move the appropriate toggle switch according to
the markings on the control panel.
Drive and steer functions are not available from the
ground controls.
Operation from Platform
1 Turn the key switch to platform control.
2 Pull out both ground and platform red
Emergency Stop buttons to the on position.
To Position Platform
1 Set the boom function speed controller to the
desired speed.
Note: Drive and steer functions are not affected by
the boom function speed controller.
2 Press down the foot switch.
3 Move the appropriate toggle switch according to
the markings on the control panel.
To Steer
1 Press down the foot switch.
2 Turn the steer wheels with the thumb rocker
switch located on top of the drive control
handle.
Use the color-coded direction triangles on the
platform controls and the drive chassis to identify
the direction the wheels will turn.
