REV C
Section 4 • Repair Procedures
June 2005
Part No. 52075
TMZ-34/19
4 - 5
2-1
Platform
How to
Remove the Platform
Models with Platform Rotate (option):
1 Support the platform with an appropriate lifting
device.
2 Remove the fasteners securing the platform to
the platform mount on the platform rotator
assembly.
Crushing hazard. The platform
may become unbalanced and fall
if not properly supported by a
lifting device when the fasteners
are removed.
3 Lift and remove the platform from the mount.
Models without Platform Rotate:
1 Remove the platform controls from the platform
control box mount. Release the clamp on the
back of the platform control box and slide the
controls up and off of the mount.
2 Support the platform with an appropriate lifting
device.
3 Remove the toggle pin securing the platform to
the platform mount.
Crushing hazard. The platform
may become unbalanced and fall
if not properly supported when the
toggle pin is removed.
4 Lift and remove the platform from the mount.
Platform Components
2-2
Platform Rotator (if equipped)
The platform rotator is a manually-operated gear
assembly used to rotate the platform 160 degrees.
How to
Remove the Platform Rotator
1 Remove the platform. See 2-1,
How to Remove the Platform.
2 Remove the platform controls from the platform
control box mount. Release the clamp on the
back of the platform control box and slide the
controls up and off of the mount. Lay the
platform controls off to the side.
Component damage hazard.
Cables can be damaged if they
are kinked or pinched.
2 Support the platform rotator with an appropriate
lifting device.
3 Remove the toggle pin securing the platform to
the platform mount.
Crushing hazard. The platform
rotator may become unbalanced
and fall if not properly supported
when the toggle pin is removed.
4 Lift the platform rotator off the platform mount.
800-610-4101
ActionRental.com
