Genie S-80, Service And Repair Manual

Page: 18 / 305

Service and Repair Manual October 2016
Specifications
2 S-80 • S-85 • S-80X Part No. 1269074
Performance Specifications
Drive speed, maximum
Stowed position,
RT tires 40 ft / 7.9 - 8.5 sec
12.2 m / 7.9 - 8.5 sec
Stowed position,
High Flotation tires 40 ft / 11 - 13 sec
12.2 m / 11 - 13 sec
Raised or Extended 40 ft / 40 - 45 sec
12.2 m / 40 - 45 sec
Braking distance, maximum
High range on paved surface 6 ft / 1.8 m
Gradeability
Refer to Operator's Manual
Boom function speeds, maximum from platform
controls
Jib Boom up (S-85) 25 - 35 sec
Jib Boom down (S-85) 15 - 25 sec
Boom up (ANSI, CSA, models) 57 - 65 sec
Boom up (CE, AS models) 75 - 83 sec
Boom down (ANSI, CSA, models) 61 - 69 sec
Boom down (CE, AS models) 75 - 83 sec
Boom extend 59 - 67 sec
Boom retract 57 - 65 sec
Turntable rotate, (360°) fully stowed 95 - 103 sec
Turntable rotate, (360°) boom raised
or extended 210 - 250 sec
Platform rotate, 160° 8 - 12 sec
Platform level (10° range of motion)
ANSI, CSA 3 - 5 sec
Platform level (10° range of motion)
CE, AS 20 - 22 sec
For operational specifications, refer to the
Operator's Manual.
Hydraulic Oil Specifications
Hydraulic Fluid Specifications
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and the viscosity index should
exceed 140. They should provide excellent antiwear,
oxidation prevention, corrosion inhibition, seal
conditioning, and foam and aeration suppression
properties.
Cleanliness level,
minimum ISO 15/13
Water content,
maximum 250 ppm
Recommended Hydraulic Fluid
Hydraulic oil type Chevron Rando HD Premium
Viscosity grade 32
Viscosity index 200
Optional Hydraulic Fluids
Mineral based Shell Tellus S2 V 32
Shell Tellus S2 V 46
Shell Tellus S4 VX 32 Shell
Shell Donax TG (Dexron III)
Chevron 5606A
Biodegradable Petro Canada Environ MV 46
Fire resistant UCON Hydrolube HP-5046
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult Genie Product
Support before use.
Optional fluids may not have the
same hydraulic lifespan and
may result in component
damage.
Note: Extended machine operation can cause the
hydraulic fluid temperature to increase beyond it's
maximum allowable range. If the hydraulic fluid
temperature consistently exceeds 200°F / 90°C an
optional oil cooler may be required.