Operator's Manual
Second Edition
y
First Printing
Inspections
30
S-100HD • S-120HD
Part No. 1261387
Test the Operating Envelope
25
Simultaneously press and
then release the LCD
screen control buttons
shown to activate status
mode.
26 Press one of the LCD screen
control buttons shown until
BOOM ANGLE is displayed.
27
Raise the boom and observe the LCD screen.
Result: The LCD screen should display:
< 10
>= 10
>= 53
> 68
28
Press one of the LCD
screen control buttons
shown until BOOM
LENGTH is displayed.
29
Extend the boom and observe the LCD screen.
Result: The LCD screen should display:
at 0
> 0
> 75
= 100
> 100
30
Retract the boom.
At the Platform Controls
Test Emergency Stop
31
Turn the key switch to platform control.
32
Push in the platform red Emergency Stop
button to the off position.
Result: The engine should shut off and no
functions should operate.
33
Pull out the red Emergency Stop button and
restart the engine.
Test the Horn
34
Press the horn button.
35
Result: The horn should sound.
Test the Tilt Sensor Alarm
36
Press a button, such as the engine RPM button
or he fuel select button.
Result: The alarm should sound at the platform
controls.
