Genie S-100HD Operator'S Manual Download Page 25 | Manualshive

Page: 25 / 55

background image

Second Edition

y

First Printing

Operator's Manual

Controls

Part No. 1261387

S-100HD • S-120HD

23

12

Engine idle (rpm) select button with indicator
lights

Press this button to select the engine idle rpm
setting. The indicator light next to the current
setting will be on.

13

Not used

14

Fault indicator light

Light on indicates the machine has one or more
faults. Faults are abnormal conditions that exist
due to component failure or system misuse.
See the appropriate service manual.

15

Low fuel indicator light

Light on indicates the machine is low on fuel.

16

Check engine indicator light

Light on indicates an engine fault.

17

Red Emergency Stop button

Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.

18

Dual axis proportional control handle for drive
and steer functions
OR Proportional control handle for drive
function and thumb rocker for steer function.

Move the control handle in the direction
indicated by the blue arrow on the control panel
and the machine will drive forward. Move the
control handle in the direction indicated by the
yellow arrow and the machine will drive
backwards. Move the control handle in the
direction indicated by the blue triangle and the
machine will steer to the left. Move the control
handle in the direction indicated by the yellow
triangle and the machine will steer to the right.
OR
Move the control handle in the direction
indicated by the blue arrow on the control panel
and the machine will drive forward. Move the
control handle in the direction indicated by the
yellow arrow and the machine will drive
backwards. Press the left side of the thumb
rocker and the machine will steer to the left.
Press the right side of the thumb rocker and the
machine will steer to the right.

19

Power indicator light

Light is on when the red Emergency Stop
button is pulled out to the on position.

20

Platform overload indicator light

Light flashing indicates the platform is
overloaded. The engine will stop and no
functions will operate. Remove weight until the
light goes off and then restart the engine.

«
...
23
24
25
26
27
...
»

Summary of Contents for S-100HD
























































Reviews:

No comments

Related manuals for S-100HD

Brand: XLT Systems Pages: 22

Brand: Terex Pages: 135

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands