Genie PWIPNW4B, User Manual

Page: 27 / 58

21
Network Camera User Manual
interface as shown below.
Move the “Sensitivity” scroll bar to set the sensitivity. Higher sensitivity value means that
motion will be triggered more easily.
Select “Add” and click “Draw”. Drag the mouse to draw the motion detection area;
Select “Erase” and drag the mouse to clear motion detection area.
After that, click “Save” to save the settings.
3. Set the schedule of the motion detection. The setup steps of schedule are the same as the
schedule recording (See
Schedule Recording ).
4.3.2 Other Alarm
 SD Card Full
1. Go to Config  Alarm  Anomaly  SD Card Full.
2. Click “Enable” and set the alarm holding time.
3. Set alarm trigger options. The setup steps are the same as motion detection. Please refer
to motion detection chapter for details.
 SD Card Error
1. When there are some errors in writing SD card, the corresponding alarms will be
triggered.
2. Go to Config
 Alarm  Anomaly  SD Card Error as shown below.