9
Network Camera User Manual
APP Monitoring
①
Enable Wi-Fi function in your mobile phone.
②
Open your phone’s APP store and search “Surperlive Plus”.
③
Install this APP in your phone.
④
Run this APP and then add the IP address, username and password of the IPC or scan the
QRcode of the IPC (Go to Config
System
Basic Information interface through Web Client.
Please make sure your camera supports P2P and the P2P function is enabled first).
IP address: please view the IP address of the IPC in the wireless router.
Username: the default username is “admin”.
Password: the default password is “123456”.
⑤
View the image through the APP. Please refer to the Mobile Surveillance User Manual for
more details.
If 3G/4G/5G network is used in your mobile phone, you shall view the IP address of the IPC
in the router and then forward the IP address and ports of the IPC in the router
(Config
Network
Port menu to set the port number). Then use the WAN IP address and
port of the IPC to log in the APP. If P2P function is enabled in the IPC, you can skip this step.
Note
：
Only some specified version supports P2P function.
