background image

 

 

 

 

 

SAFETY FEATURES

Safe-T-Beam® (STB) Non-Contact Reversing System

Puts an invisible beam across the door opening.  The door stops
and reverses to the full open position if anything 
th

passes 

rough the beam.  LED indicator lights on the powerhead and

on the STBs provide a self diagnostic code if an operational 

problem exists.

Safe-T-Reverse® Contact Reversing System

Automatically stops and reverses a closing door within two 
seconds of contact with an object.

Automatic ForceGuard™ Control

Automatically sets the force required to fully open and close the 

door for maximum safety.

Watch Dog™ Monitoring System

Monitors the Safe-T-Beam® system to ensure proper function-
ality and will automatically stop and reverse a closing door if a 
problem is detected.

Manual Emergency Release

Manually releases door from door opener.  Used during a power

failure or other emergency to allow manual opening and closing 
of door.

SmartSet™ Electronic Programming

Easily adjust the programming to reduce opening speed to a
desired rate, vary limits and force, and program new remotes. 

Automatic Lighting System

Two bulb lighting system supplies up to 200 Watts of light for
safer evening exits and entries.  Turns 

ON

 when door is activated 

and automatically turns 

OFF

 4 minutes later.

Integrated Motion Detection  

(Not available on all models)

Select units have motion detection built into the powerhead.

  Lights automatically turn 

ON

 when motion is detected for much 

safer movement through the garage.  Lights will turn 

OFF

 after

4 minutes of no motion.

3

INTELLICODE® 2 Access Security System

A new generation superior encryption system  that enhances
the securi ty of the door opener by continuously changing the 
access code each time the remote is used.  The door opener 

esponds to each new code only once. An access code copied 

from a working system and tried again will not control the 

door opener.

OPENER FEATURES

Wall Console, Series III

Operates door opener from inside garage.  The Wall Console has

an Indicator Light with: Open/Close, Sure-Lock™, and 
Independent Light Control buttons.

©2011 The Genie Company

 

 

 

 

 

9/2011

r

TRANSMITTER COMPLIANCE STATEMENT

Transmitters comply with all United States and Canadian legal 
requirements as of the date of manufacture. 

 

No warranty is made

  that they comply with all legal requirements of any other jurisdiction.  

If transmitters are to be used in another country, the importer

  must determine compliance with any local laws and 

 which m

regulations 

ay differ from United States and Canadian requirements 

prior to use.

Los transmisores cumplen con todas las reglamentaciones legales

 

de los Estados Unidos y del Canadá, en la fecha de fabricación. 
Ninguna garantía se da que cumplan con todas las reglamentaciones

 legales de ninguna otra jurisdicción.  Si los transmisores se van a

 utilizar en otro país, el importador debe determinar si cumplen con 

las reglamentaciones y leyes locales que puedan ser diferentes a las

 reglamentaciones de los Estados Unidos y del Canadá, antes de usar

los mismos.

Les émetteurs sont conformes à la réglementation américaine et 

canadienne à compter de leur date de fabrication.    Aucune garantie 

n’est stipulée indiquant qu’ils sont conformes à toutes les 
prescriptions juridiques d’autres autorités.  Si les émetteurs sont

 utilisés dans d’autres pays, il incombe à l’importateur d’en 

déterminer leur conformité aux lois et règles locales pouvant 
différer de celles des États-Unis et du Canada avant toute utilisation
desdits émetteurs.

Sendegeräte entsprechen allen gesetzlichen Bestimmungen in den

 

USA und Kanada zum Zeitpunkt der Herstellung.  Wir übernehmen

 keine Gewährleistung für die Einhaltung aller gesetzlichen 

Bestimmungen in anderen Ländern.  Sollen Sendegeräte in anderen 
Ländern eingesetzt werden, so muss der Importeur vor dem

 Gebrauch sicherstellen, dass die Sendegeräte auch solchen lokalen 

Bestimmungen entsprechen, welche von den Bestimmungen der

 USA und Kanadas abweichen.

 and 

Car2U

®

 compatible.  Refer to the programming

instructions on page 6. 

HomeLink

®

Summary of Contents for IntelliG 1000















Reviews: