Section 2 • Specifications
September 2014
Part No. 123701
GTH-1048 • GTH-1056
2 - 3
SPECIFICATIONS
Hydraulic Specifications
Hydraulic Fluid Specifications
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and the viscosity index should
exceed 140. They should provide excellent antiwear,
oxidation, corrosion inhibition, seal conditioning, and
foam and aeration suppression properties.
Cleanliness level, minimum
15/13
Water content, maximum
250 ppm
Recommended Hydraulic Fluid
Hydraulic oil type
Chevron Rando HD Premium MV
Viscosity grade
32
Viscosity index
200
Optional fluids
Biodegradable
Petro Canada Environ MV 46
Fire resistant
UCON Hydrolube HP-5046
Mineral based
Shell Tellus S2 V 32
Shell Tellus S2 V 46
Chevron Hydraulic Oil 5606A
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult the Genie
Service Department before use.
Optional fluids may not have the
same hydraulic lifespan and may
result in component damage.
Note: Extended machine operation can cause the
hydraulic fluid temperature to increase beyond it's
maximum allowable range. If the hydraulic fluid
temperature consistently exceeds 200°F / 90°C an
optional oil cooler may be required.
Do not top off with incompatible
hydraulic fluids. Hydraulic fluids
may be imcompatible due to the
differences in base additive
chemistry. When incompatible
fluids are mixed, insoluble
materials may form and deposit in
the hydraulic system, plugging
hydraulic lines, filters, control
valves and may result in
component damage.
Note: Do not operate the machine when the
ambient air temperature is consistently above
120°F / 49°C.
Hydraulic Fluid Temperature Range
1
Chevron hydraulic oil 5606A
2
Petro-Canada Environ MV 46
3
UCON Hydrolube HP-5046D
4
Chevron Rando HD Premium MV
-40
-40
-22
-30
-4
-20
14
-10
32
-0
50
10
68
20
86
30
104
40
122
50
F
C
1
2
3
4
Ambient Air Temperature
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
Summary of Contents for GTH-1048
