Second Edition • Second Printing
Operator's Manual
Transport and Lifting Instructions
Part No. 1274894GT
GS-2646 AV • GS-2646 AV35
49
Observe and Obey:
Only qualified riggers should rig and lift the
machine.
Only qualified forklift operators should lift the
machine with a forklift rated to lift the machine
weight.
Be sure the crane capacity, loading surfaces
and straps or lines are sufficient to withstand
the machine weight. See the serial label for the
machine weight.
Lifting the Machine with a Forklift
Be sure the extension deck, controls and
component trays are secure. Remove all loose
items on the machine.
Fully lower the platform. The platform must remain
lowered during all loading and transport
procedures.
Use the forklift pockets located on both sides of the
ladder.
Align the forklift forks with the forklift pockets.
Drive forward to the full extent of the forks.
Raise the machine 16 in / 0.4 m and then tilt the
forks back slightly to keep the machine secure.
Be sure the machine is level when lowering the
forks.
Minimum Forklift Capacity
GS-2646 AV
5,400 lbs/2,449 kg
GS-2646 AV35
6,400 lbs/2,903 kg
Lifting the machine at the
designated points at the battery
side or the ground control side of
the machine can be performed,
but is not recommended. Lifting
the machine from the the battery
side or ground control side can
result in component damage.
NOTICE
Summary of Contents for GS-2646 AV
Page 57: ......
