manualshive.com logo in svg

Genie GS-2646 AV, Operator'S Manual

Share
Download
Genie GS-2646 AV Operator'S Manual Download Page 25

Second Edition • Second Printing

 

Operator's Manual

 

 Controls 

 

 

Part No. 1274894GT

 

GS-2646 AV • GS-2646 AV35 

23 

 

 

5

 

Proportional control handle and function 
enable switch for drive, steer, lift and platform 
extend/retract functions 

Lift function: Press and hold the function 
enable switch to enable the lift function on the 
platform control handle. Move the control 
handle in the direction indicated by the blue 
arrow and the platform will raise. Move the 
control handle in the direction indicated by the 
yellow arrow and the platform will lower. The 
descent alarm should sound while the platform 
is lowering. 

Drive function: Press and hold the function 
enable switch to enable the drive function on 
the platform control handle. Move the control 
handle in the direction indicated by the blue 
arrow on the control panel and the machine 
will move in the direction that the blue arrow 
points. Move the control handle in the direction 
indicated by the yellow arrow on the control 
panel and the machine will move in the 
direction that the yellow arrow points. 

Platform extend/retract function: Press and 
hold the function enable switch to enable the 
platform extend/retract function on the platform 
control handle. Move the control handle in the 
direction indicated by the blue arrow and the 
platform will extend. Move the control handle 
in the direction indicated by the yellow arrow 
and the platform will retract. 

6

 

Thumb rocker switch for steer function 

Press the left side of the thumb 
rocker and the machine will turn in 
the direction the blue triangle 
points on the platform control 
panel. 

Press the right side of the thumb 
rocker and the machine will turn in 
the direction the yellow triangle 
points on the platform control 
panel. 

7

 

LED diagnostic readout / battery charge 
indicator 

LED diagnostic readout, battery charge 
indicator and lift/drive mode indicator 

8

 

Drive function button 

Push this button to activate the 
drive function. 

9

 

Platform extend/retract function button 

Press this button to activate the 
platform extend/retract function. 

 

 

Summary of Contents for GS-2646 AV


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands