14
Genie AWP
Part No. 33424
Operator’s Manual
Fourth Edition
Lowering Tilt-back Assembly
1 Be sure area behind machine and under
tilt-back frame is clear of personnel and
obstructions.
2 Remove outriggers from base and place in
storage sockets.
Tilt-back frame is spring loaded and will
immediately fall outward when retaining pin is
removed. Maintain firm grasp on tilt-back frame
and remove retaining pin.
3 Lower tilt-back frame and guide the tilt-back
strut into the strut socket.
4 Insert retaining pin into strut socket.
Tilt-back Operation Instructions
Observe and obey:
Retaining pin must be inserted to prevent
spring loaded tilt-back frame from dropping.
Do not tilt the machine back unless area is
clear of personnel and obstructions.
Do not stand behind or under tilt-back frame
when raising or lowering it.
Lifting force necessary requires two people.
OPERATING INSTRUCTIONS
Tilt-back Frame
The Genie AWP-30 & 36
have a tilt-back frame
which allow the machine
to roll through a standard
doorway.
