8
STEP 7
Complete the Programming:
1. Restore power to the garage door opener.
2. Follow the on screen prompts to complete the set-up and test the Aladdin Connect™ system.
NOTE:
This kit includes one DPS for use with one door only. The DPS included is already programmed to the DCM . Additional sensors can be purchased separately from your local
Genie retailer. To program additional sensors, first complete STEP 7 initial setups and programming, then go to “Add a Door Sensor” under the “Doors” tab inside the app or view the
installation video at www.GenieCompany.com/AladdinConnect/InstallationVideo.
NOTE:
A white light will flash and an audible beep will sound as an indication that the door is about to move when commanded by the Aladdin Connect™ or other compatible
app(s).
Features:
If the garage door opener is
operated by any means, the
Genie Aladdin Connect™ app
will send an alert to your device
indicating the status of the
garage door.
A log is also created to indicate
when the door was operated
and by what means.
Visit www.GenieCompany.
com/AladdinConnect for more
information.
DO NOT RETURN PRODUCT TO
STORE.
For technical assistance,
contact Aladdin Connect™
Customer Service at:
1-866-599-4995
or watch the installation video at:
www.GenieCompany.com
Use of this product, the software embedded within this product and the related application software is subject to the Terms and Conditions available at: www.GenieCompany.
com/AladdinConnect