background image

Genie Load Lifter

Part No. 82299

Third Edition • Second Printing

Operator's Manual

Copyright © 1995 by Genie Industries

First Edition:

Second Printing, July 1995

Second Edition: Third Printing, December 2001
Third Edition:    Second Printing, January 2004

"Genie" is a registered trademark of
Genie Industries in the U.S.A. and many other
countries. "Load Lifter" is a trademark of Genie
Industries.

      Printed on recycled paper

Printed in U.S.A.

Important

Read, understand and obey these safety rules and
operating instructions before operating this machine.
Only trained and authorized personnel shall be
permitted to operate this machine. If you have any
questions, call Genie Industries.

Contents

Page

Safety ......................................................................... 1

Legend ........................................................................ 5

Pre-operation Inspection ............................................. 6

Function Tests ............................................................ 8

Workplace Inspection ................................................ 10

Operating Instructions ............................................... 11

Decals ...................................................................... 13

Specifications ........................................................... 15

Contact us:

Internet: http://www.genielift.com
e-mail: [email protected]

Summary of Contents for 412005000198



















Reviews: