Part No. 43063
Genie Z-30/20
3 - 1
Section 3 - Scheduled Maintenance Inspections
Service Manual - Third Edition
Tools are
required
New parts
required
Warm
engine
required
Cold
engine
required
Dealer
service
suggested
Scheduled Maintenance Inspections
Observe and Obey:
Maintenance inspections shall be completed by
a person trained and qualified on the
maintenance of this machine.
Scheduled maintenance inspections shall be
completed daily, quarterly, annually and every
2 years as specified on the Maintenance
Inspection Report.
Failure to properly complete each
inspection when required may
cause death, serious injury or
substantial machine damage.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating machine.
Keep records on all inspections for three years.
Machines that have been out of service for a
period longer than 3 months must complete the
quarterly inspection.
About This Section
The Schedule
There are four types of maintenance inspections
that must be performed according to a schedule—
daily, quarterly, annual and two year. To account
for repeated procedures, the Maintenance Tables
and the Maintenance Inspection Report have been
divided into four subsections—A, B, C, D. Use the
following chart to determine which group(s) of
procedures are required to perform a scheduled
inspection.
Inspection
Table or Checklist
Daily
A
Quarterly
A + B
Annual
A + B + C
Two year
A + B + C + D
Maintenance Tables
The maintenance tables contained in this section
provide summary information on the specific
physical requirements for each inspection.
Complete step-by-step instructions for each
scheduled maintenance procedure are provided in
section 4, Scheduled Maintenance Procedures.
Maintenance Inspection Report
The maintenance inspection report contains
checklists for each type of scheduled inspection.
Make copies of the Maintenance Inspection
Report to use for each inspection. Store
completed forms for three years.
