Genie CCTV DN83TSPX Page 18 Instruction Manual Download

Page: 18 / 22

PIXIM True Day/Night Bodied Camera

■

How to Use the Camera

●

SYNC

: Two synchronisation modes are available, INTERNAL and

     EXTERNAL LINELOCK. In LINE-LOCK mode, it synchronises the
     video signal between cameras without a synchronous generator.
     The line-lock synchronisation is only used in areas of 60Hz (NTSC)
     / 50Hz (PAL).

- INT : Internal synchronisation
- LL : External line-lock synchronisation

ㆍ

If 'LL' is selected, it can be adjusted to the desired phase.

Press the SET button.

ㆍ

Adjust to the desired phase from 0 to 624.

LINE LOCK

V PHASE

PREVIOUS PAGE..

299

624

●

RS485 SETUP

: This function sets up the camera communication

status when controlling the camera through an external control device.

RS485 SETUP

CAMERA # :

PROTOCOL

BAUD RATE

PREVIOUS PAGE..

1 < 1 > 255

PELCO-D
PIXEM MULTIDROP

< 2400 >
< 4800 >
< 9600 >
< 19200 >

●

RESET

: Resets the camera.

EXIT MENU

VERSION :

SAVE&EXIT

DEFAULT

CANCEL

7.3.2-7.0.281

EXIT MENU.

●

VERSION

: 7.3.2-7.0.281

●

SAVE&EXIT

: Saves all the setting menus and then exits.

●

DEFAULT

: Resets the camera settings to the factory defaults.

●

CANCEL

: Cancel to the camera settings.

ENABLE MASKS (1 to 6)

MASK 1

MASK 2

MASK 3

MASK 4

MASK 5

MASK 6

PREV. NEXT.

OFF

ENABLE MASKS (7 to 12)

MASK 7

MASK 8

MASK 9

MASK 10

MASK 11

MASK 12

PREVIOUS PAGE..

OFF

ㆍ

White : PRIVACY-ZONE

                Position movement
    Blue : PRIVACY-ZONE Size
              enlargement or reduction

ㆍ

For PRIVACY-ZONE Confirm,

long press SET button

Summary of Contents for DN83TSPX























Search results

Summary of Contents for DN83TSPX

Reviews:

Related manuals for DN83TSPX

Brands by name

Popular brands

Genie CCTV DN83TSPX, Instruction Manual

Search results

Summary of Contents for DN83TSPX

Reviews:

Related manuals for DN83TSPX

Brands by name

Popular brands