Speed Dome Camera Instruction Manual
25/50
OSD Display
P/T/Z Information
Camera ID
Alarm Information
Action Title
Preset Label
LABEL12345 PRESET1
I:-2- O:1
CAM 1 15/4/x1/N
P/T/Z Information Displays the amount of pan from zero degrees vertically, the amount
of tilt from zero degrees horizontally and current compass direction.
It also shows the amount of the zoom magnification.
Camera ID
Displays the selected Camera ID (Address).
Identfies Actions
"SET PRESET xxx"
When Preset xxx is memorised.
"PRESET xxx"
When the camera reaches Preset xxx.
"PATTERN x"
When Pattern x is in action.
"SWG
×
/PRESET xxx" When Swing x is in action. Displays both Swing
number and Preset number.
Action Title
"UNDEFINED"
When a undefined function is called to run
Preset Label
Displays preset labels when the camera arrives at presets.
Alarm Information Displays activated alarms. This information shows current state of
Alarm Inputs and Relay Outputs. If an Input point is ON state, it will
show a number corresponding to each point. If an Input point is OFF
state,
'-'
will be displayed.
Example: Input points 2 & 3 inputs are ON and Output is ON, OSD will
show as below.
I:-23 O:1
OPERATION
3
