48 Genesis LXP
®
© 2015 Genesis Attachments, LLC
WELDING MAINTENANCE
SHEAR JAW HARD-SURFACING PATTERNS
Upper Jaw
Single passes approximately 1” apart. Begin just behind
the piercing blade seats and continue toward the throat.
Use three to five stringers, depending on the model of the
shear.
Upper Jaw Face
Single passes approximately 1” apart. Begin at the bottom
of the upper face and continue approximately 2/3 up the
front face.
Lower Jaw
Single passes approximately 1” apart. Work across the
top of the chin plate and along the lower jaw toward the
throat. Use two to three stringers, depending on the model
of the shear.
Lower Jaw Chin
Crosshatch the chin plate with stringer beads at 45˚ angles
to form 1” squares.
Staggered stringers
Grain
Staggered stringers
Grain
Protection strip
↓
↓
↓
↓
↓
↓
↓
↓
