L
USER MANUAL
Service
Bypass Input >
LCD Contrast > Show Card > Unit On/Off > Dialler On/Off > Securitel
On/Off > Modem On/Off
You are able to bypass inputs, adjust the LCD Contrast of your Keypad (RAS) Identifying
User Cards, and Selecting Dialler, Securitel and Modem functions, selecting them to be
either
ON
or
OFF
.
How to Bypass inputs if system cannot be Armed
If you are unable to
Arm
your alarm system, one possibility is that one of your inputs is
unsealed. For example, your input device is a broken, (example) reed switch on a door or
window. The only way to
Arm
a Genesis system is when all the inputs are sealed.
Bypassing an input also means that the Genesis system will see a seal on the broken
input. The following steps can be used so you can bypass an input and secure the system.
This fault should be reported to your system installation Company to rectify this input.
How to bypass an input
To select this options please follow the example below:
If the PIN Code is
5609,
select the Bypass Input
In the
SERICE
menu.
¾
Enter your PIN
5609
¾
Press
E
¾
Press
C
the Genesis menu will appear, with
showing on the
screen
SERVICE
?
¾
Press
E
when you see the test input option in the SERVICE menu.
¾
Use the
<
or
>
scroll keys to select the relevant input you want to bypass.
SERVICE
?
Bypass input
Sensor 1
Unsealed
SERVICE
?
>
>
C
¾
Press
A
or
B
to bypass the relevant input. You can now arm your system
using the procedure on page 9.
Genesis V4.0 User Manual, Issue 1, January 2005
Page 26 of 38
