SHUTTERS OPERATION
1.
Raising the blind
Grab the strap and pull it down. During this time, the loose part of the tape will be rolled up to the
retractor and the roller shutter's
blind
will rise to a certain height. Repeat the procedure several times
until the
blinds
stops by the limiters mounted in the bottom bar and the blind is completely open. The
last movement of the tape should be made slowly so that the stops do not hit the roller shutter box too
much.
2.
Lowering the blind
Grab the strap just above the retractor and pull it towards you at an angle of about 20 degrees to release
the retractor lock. Then, holding the tape, it should be moved gently towards the window, so that the
falling
blind
will pull the tape inside. Repeat the procedure several times until the blind is completely
closed. When lowering the shutter, make sure
it
does not hit the
bottom
too much.
When lifting and lowering the blind, it can be stopped anywhere, leaving the room partially shaded.
When
lifting and lowering the blind, make sure that the movement of the tape is perpendicular to the exit of the
tape from the box. Tape deviations can cause it to bend and jam.
OPERATION MANUAL
ROLLER SHUTTER
WITH MOSQUITO SCREEN
9
myeuropeanwindows.com
