11
3.4 Operating elements
1
Power switch ...................................... switch on and off the Unit
2
Timer switch ...................................... to adjust time of procession / start ultrasonic
3
Pilot lamp ........................................... shows heating works
4
Temperature switch ........................... to adjust heating temperature
3.5 Cleaning procedure
o
Switch on the device at the power switch.
o
Turn the temperature selector switch on the desired cleaning temperature. (the
controlling light (3) begins with some delay), the heating works.
o
After the cleaning temperature is reached lay the cleaning objects in the basket and hang
up this carefully in the tank. Attention: There is the danger of scald by splash, in the liquid
do not touch. Cleaning objects turn around perhaps with tools to avoid air bubbles inside.
With the bringing in of the basket pay attention to the fact that the tank is not too full, or
overruns. In that case, liquid must be taken out accordingly.
o
Turn up the timer for the maximum time and then back for the desired insonification time.
Tip:
Choose the insonification time so briefly as possible. According to soiling, size and
used cleaning liquid the cleaning duration amounts experience to approx. 5 - 15 min.
o
With parts (sections) sensitive to warmth follow temperature (distortion danger).
o
At the ends of the insonification time take out the cleaning objects with the basket (care
combustion danger). Let the cleaning objects cool down and rinse it under fluent water.
o
If necessary repeat cleaning process
o
With the indirect cleaning the cleaning object is laid (put) in an e.g. glass application (as
accessories available) and is covered with cleaning liquid and put (arranged) in the
basket. (Or with the matching hold ring in the hole lid (as accessories available, for 2
glass applications, for the use of different cleansing liquids) hung up.
Attention:
overcrowding danger.
o
The application vessels must dip min 3 cm deep into the contact liquid.
o
You can use as a tank filling either the available (in existence) cleaning liquid or special
contact liquid for ultrasonic – transference (transmission).
