General XL4 MKII, Instruction Manual

Page: 8 / 24

8
POWER SUPPLY
▪
The instrument is supplied with four AA Ni-
Mh batteries as its standard power source.
▪ The instrument can also be powered by
four AA alkaline batteries or via the mains
power supply.
Charging or replacing the Ni-Mh batteries
▪ Unscrew and remove the battery cover door
and the batteries.
▪ Insert the batteries into the indoor charger
and plug into a power source.
▪ When fully charged, insert the batteries
according to polarity and replace the battery
door.
Replacing alkaline batteries
▪ Unscrew and remove the battery cover
door and the batteries.
▪
Insert the batteries according to polarity
and replace the battery door.
Mains power
▪ Insert the mains power adaptor into the
port beside the battery door and plug into
a power source.
▪ The instrument can operate on mains
power as an alternative to battery
operation.
▪
Do not store in locations where moisture
can be present or where the chargers could
be exposed to extreme temperatures.
USING YOUR LASER