background image

WARRANTY INFORMATION

General Tools & Instruments’ (General’s) P18HPART VGA Resolution Wireless
Articulating Probe is warranted to the original purchaser to be free from defects
in material and workmanship for a period of one year. Subject to certain
restrictions, General will repair or replace the probe if, after examination, the
company determines it to be defective in material or workmanship. The
warranty period begins on the date of purchase. You are encouraged to register
your product online. General will extend your warranty an additional 60 days if
you register at www.generaltools.com/ProductRegistry.

This warranty does not apply to damages that General determines to be from
an attempted repair by non-authorized personnel or misuse, alterations, normal
wear and tear, or accidental damage. The defective unit must be returned to
General Tools & Instruments or to a General-authorized service center, freight
prepaid and insured.

Acceptance of the exclusive repair and replacement remedies described herein
is a condition of the contract for purchase of this product. In no event shall
General be liable for any incidental, special, consequential or punitive damages,
or for any cost, attorneys’ fees, expenses, or losses alleged to be a
consequence of damage due to failure of, or defect in any product including,
but not limited to, any claims for loss of profits.

Register now at www.generaltools.com/ProductRegistry to receive a 60-day
extension to your warranty.

RETURN FOR REPAIR POLICY

Every effort has been made to provide you with a reliable product of superior
quality. However, in the event your instrument requires repair, please contact
our Customer Service to obtain an RGA (Return Goods Authorization) number
before forwarding the unit via prepaid freight to the attention of our Service
Center at this address:

Remember to include a copy of your proof of purchase, your return address,
and your phone number and/or e-mail address.

11

Summary of Contents for P18HPART













Reviews: