38
Shooting
Setting Area Analysis Parameters
This section explains how to apply area analysis tools to the
thermal image.
1
Make sure that the thermal camera is in
null mode (see p. 14).
Press the
MENU/ENTER button to open the Main
Menu.
2
Use the UP or DOWN arrow to navigate to
the Analysis line. Then press the
MENU/ENTER button to open the Analysis
menu.
3
Use the UP or DOWN arrow
to navigate to the Area line.
Then press the
MENU/ENTER button to open
the Area submenu.
4
Setting the analysis area.
• Press the
UP
or
DOWN
arrow to select one
or more areas, then press the
MENU/
ENTER
button. A check mark will appear to
the left of the selected area(s) and one or
more boxes will appear on the screen.
• A reading in a box with a label at its left will
appear at the top right corner. The reading
represents the highest/lowest/average
temperature of the current area.
• Press the
LEFT
or
RIGHT
arrow to select
the maximum, minimum or average
temperature for display. The letter in the
label to the left of the box indicates which
temperature is displayed: H for the highest
temperature, L for the lowest, and A for the
average.
Using Analysis Tools
