background image

REPLACEMENT PARTS & OPTIONAL ACCESSORIES 

• Spare oxygen probe

• Spare probe head and diaphragm set

• Electrolyte for probe

• 9-VDC adapter for 110VAC power supply

WARRANTY INFORMATION

General Tools & Instruments’ (General’s) DOM5512SD Dissolved Oxygen Meter with
Datalogging SD Card is warranted to the original purchaser to be free from defects in
material and workmanship. Subject to certain restrictions, General will repair or replace
this instrument if, after examination, the company determines it to be defective in
material or workmanship for a period of one year.

This warranty does not apply to damages that General determines to be from an
attempted repair by non-authorized personnel or misuse, alterations, normal wear and
tear, or accidental damage. The defective unit must be returned to General Tools &
Instruments or to a General-authorized service center, freight prepaid and insured.

Acceptance of the exclusive repair and replacement remedies described herein is a
condition of the contract for purchase of this product. In no event shall General be liable
for any incidental, special, consequential or punitive damages, or for any cost, attorneys’
fees, expenses, or losses alleged to be a consequence of any damage due to failure of, or
defect in any product including, but not limited to, any claims for loss of profits.

RETURN FOR REPAIR POLICY

Every effort has been made to provide you with a reliable product of superior quality.
However, in the event your instrument requires repair, please contact our Customer
Service to obtain an RGA (Return Goods Authorization) number before forwarding the unit
via prepaid freight to the attention of our Service Center at this address:

General Tools & Instruments
80 White Street
New York, NY 10013
212-431-6100

Remember to include a copy of your proof of purchase, your return address, and your
phone number and/or e-mail address.

15

Summary of Contents for DOM5512SD

















Reviews: