6
FUNC/INRUSH
—1)
Selects among
resistance
measurement, capacitance measurement, diode
integrity and continuity check modes with rotary
function switch in
position, 2)
Switches
between AC and DC
with rotary function switch in
or
position, 3)
Enters surge current
measurement mode
with rotary function in
position, 4)
Enters NCV sensitivity set mode
if
pressed and held when powering on the meter.
MAX/MIN—Pressed once, enters Max/Min mode
.
Meter displays maximum value recorded during
current measurement session on secondary
readout.
Pressed twice, switches to display
minimum
value recorded during current
measurement session on secondary readout.
Pressed a third time, exits Max/Min
mode.
HOLD—Pressed once
, holds measured value(s)
(freezes main and secondary readouts).
Pressed
again
, releases both readouts.
—
Pressed briefly
, enters manual ranging
mode in broadest range. Each subsequent button
press switches to next-narrowest full-scale
measurement range. Pressing button in narrowest
range returns to auto ranging mode.
Pressed and
held
for >2 seconds, activates display backlight
(and LED work light if rotary function switch is in
or
position).
6
. Test lead jacks
7
. Clamp jaw release
8
. Clamp jaw
9
. Battery compartment (on back)
