General AOH13PNCC Operating Manual Download Page 17 | Manualshive

Page: 17 / 21

General AOH13PNCC Operating Manual Download Page 17

En-16

CLEANING THE LIGHT-REGENERATED DEODORIZING FILTER

●

The deodorizing effect of the light-regenerated deodorizing filter is restored by drying it in sunlight. (It is recommended that
this be done every 6 months.)

●

If the deodorizing filter is used for an extended period of time and has become very dirty, its deodorizing performance will
be reduced. It is recommended that this filter be replaced approximately every 3 years. Replace this filter with the light-
regenerated deodorizing filter sold separately (Model: UTR-FA07-1 Type).

Removing the light-regenerated deo-
dorizing filter

1. Use the remote controller to stop opera-

tion and unplug the power cord.

2. Open the intake grille and remove the

right-side air filter. (Refer to page 13.)

3. Remove the dust collection light-regener-

ated deodorizing filter.

1

Use your fingers to spread open the two tabs at the

top of the frame for the light-regenerated deodorizing
filter at the back of the air filter.

2

Use your fingers to push up on the bottom of the light-

regenerated deodorizing filter. (Do this to one side at
a time.)

Back of air filter

Light-regenerated
deodorizing filter
frame

Top tabs

Cleaning the light-regenerated deodor-
izing filter

1. Dry the light-regenerated deodorizing fil-

ter in direct sunlight.

●

Dry the light-regenerated deodorizing filter in direct
sunlight.

●

It is recommended that this filter be left in direct sun-
light for 6 hours.

●

Never wash the filter with water or other liquid.

Light-regenerated deodorizing filter

Mounting the light-regenerated deodor-
izing filter

1. Mount the light-regenerated deodorizing

filter to the back of the right-side air
cleaner.

Light-regenerated
deodorizing filter

1

Insert the edge of the light-regenerated deodorizing
filter onto the lower tabs of the light-regenerated deo-
dorizing filter frame on the back of the air filter.

Light-regenerated deodorizing filter

Lower tabs

2

Use your fingers to push on the light-regenerated deo-
dorizing filter into place on the two upper tabs of the
light-regenerated deodorizing filter frame.

Upper tabs (2 locations)

Air filter

Light-regenerated
deodorizing filter frame

2. Mount the right-side air filter and close the

intake grille. (Refer to page 13.)

1

Use fingers to spread open.

2

Push up on the bottom.

Push

Push

Все каталоги и инструкции здесь:

http

:

//splitoff.ru/tehn-doc.html

«
...
15
16
17
18
19
...
»

Summary of Contents for AOH13PNCC






















Reviews:

No comments