5
Specifications
Model Number
............................................................................. 10-105 & 10-105CF
Stock Number ............................................................................... 10-105 & 10-105CF
Dust Port Inlet…………………………………………………………………………….
1-
6” or 2
-
4”
Bag Filter ....................................................................................... 2 Micron
Canister Filter ............................................................................... 1 Micron
Overall Dimensions (L x W x H/in) .................................................38
”
x 31
½”
x 76
”
Sound Rating @ 3ft ....................................................................... High Speed 80-85 dB
Air Flow Capacity........................................................................... High Speed 1250 CFM
Blower Wheel Diameter...............................................................
12 ¾”
Static Pressure
…………
.........................................................
9
”
of Water
Motor ............................................................................................ 1 1/2 HP, 110/220V, 60Hz, 1 PH, 14/7 A
Weight ........................................................................................... 106 lbs. CF unit 130 lbs.
Shipping Weight ............................................................................ 112 lbs. CF unit-140 lbs.
For Your Own Safety
1. Read and understand instruction manual before installing or operating air cleaner.
2. To reduce the risk of injury disconnect the dust collector from the power source (unplug) before
servicing or changing bags or Canister filter.
3. Do
NOT
use this Dust Collector for other than its intended use.
4. Make certain the switch is in the
OFF
position before connecting the machine to the power supply or
cleaning.
5. To reduce the risk of electrical shock, do not expose dust collector to water or rain.
6. Make certain the machine is properly grounded.
7. Wear ear protectors (ear plugs or muffs) & approved safety glasses/face shield during extended
periods of operation.
8. To avoid a potentially dangerous situation, do not use this equipment to filter flammable vapors or
smoke. This dust collector is designed and intended for the collection of wood dust only. It is neither
designed nor intended for any other purpose whatsoever.
9. Failure to comply may result in serious injury and / or property damage.
10). Keep the floor around the machine clean and free of scrap material, oil & grease.
110. Check for damaged parts before/after use.
The above specifications were current at the time this manual was published, but because of our policy
of continuous improvement, General reserves the right to change specifications at any time and without
prior notice, without incurring obligations.
