background image

12 

 

Warranty Statement and Policy 

 

 

Commercial General™ (Green Line) & Excalibur™ (Black Line) branded products:

  3 -YEAR LIMITED 

WARRANTY All products are warranted for a period of 3 years (36 months) from the date of purchase. 

General™ agrees to repair or replace any part or component whic

h upon examination, proves to be 

defective in either workmanship or material or parts and labor to the original purchaser during this 3-

year warranty period, subject to the “conditions and exceptions” as listed below. Repairs made without 

the written consent of General will void the warranty  

EXTEND YOUR WARRANTY:

  

Register your new General™ or Excalibur™ within 60 days of your purchase 

and get an extended 2 years, for a total of 5 years, of warranty coverage.   

Go t

www.general.ca/warranty/registration

 

DISCLAIMER:

 

Because we are committed to making constant improvements, General™ reserves the 

right to make changes to components, parts or features of this unit as deemed necessary, without prior 
notice and without obligation to install any such changes on previously delivered units. Reasonable care 
is taken at the factory to ensure that the specifications and information in this manual corresponds with 
that of the unit with which it was supplied.  

 
TO FILE A CLAIM

: To file a claim under our Standard 3 -year Limited Warranty, all defective parts, 

components or machinery must be returned freight or postage prepaid to General™, or to a nearby 
distributor, repair center or other location designated by General™. For further details call our service 

department at 1-844-877-5234 or [email protected]  Along with the return of the product 

being claimed for warranty, a copy of the original proof of purchase and a “letter of claim” must be 

included (a warranty claim form can also be used and can be obtained, upon request, f

rom General™ or 

an authorized distributor) clearly stating the model and serial number of the unit (if applicable) and 
including an explanation of the complaint or presumed defect in material or workmanship.   
 

CONDITIONS AND EXCEPTIONS

: This coverage is extended to the original purchaser only. Prior warranty 

registration is not required but documented proof of purchase, i.e. a copy of original sales invoice or 
receipt showing the date and location of the purchase as well as the purchase price paid, must be 
provided at the time of claim.  Warranty does not include failures, breakage or defects deemed after 

inspection by General™ to have been directly or indirectly caused by or resulting from; improper use, or 

lack of or improper maintenance, misuse or abuse, negligence, accidents, damage in handling or 
transport, or normal wear and tear of any generally considered consumable parts or components. 

Repairs made without the written consent of General™ will void all warranty. 

 

This five-year warranty 

does not cover products used for commercial, industrial or educational purposes. The warranty term for 
these claims will be limited to a two-year period.  

 

 

Summary of Contents for 10-105

















Reviews: