UNPACKING AND PREPARATION FOR SET-UP & ASSEMBLY
UNPACKING
Carefully unpack and remove the unit and its components from its shipping container and check for missing or
damaged items as per the list of contents below.
NOTE: Please report any damaged or missing items to your GENERAL® INTERNATIONAL distributor immediately.
SAFETY
Use caution and wear gloves when handling
me-tal parts such as the belt clamps, which can
cut if handled carelessly.
The model 10-105 is a heavy machine (106
Lbs. shipping weight - 48 kg.) Do not overexert.
Arran-ge to have help nearby and ready for
unpacking and set up.
The sound level of this machine is rated at
ap-proximately 80 to 85 db during operation.
Make sure that adequate hearing protection is
used and that the overall sound level within the
working environment is taken into consideration.
ADDITIONAL REQUIREMENTS FOR SET-UP & ASSEMBLY
• Flat piece of wood (such as a ruler)
• Medium Phillips Screwdriver
• 10 & 12 mm open end wrench or adjustable wrench
• 1 extra person for help with lifting
LIST OF CONTENTS
QTY
DRUM ........................................................................... 1
FAN/MOTOR ASSEMBLY .............................................. 1
CANISTER FILTER
(10-105CF M1 ONLY) ..............................
1
BELT CLAMP ................................................................. 2
VERTICAL SUPPORT ROD ............................................. 3
CASTERS ....................................................................... 4
BAG HANGER
(10-105 M1 ONLY)
.........................................1
“Y” FITTING/INLET WITH END CAP .............................. 1
5” HOSE ........................................................................ 1
HOSE CLAMP ............................................................... 2
COLLECTOR BAG ......................................................... 1
FILTER BAG
(10-105 M1 ONLY)
....................................... 1
DUST OUTLET ................................................................. 1
GASKET ......................................................................... 1
BASE PLATE ................................................................... 1
FOAM GASKET ............................................................ 1
10-12 MM COMBINATION WRENCH .......................... 1
ALLEN KEY .................................................................... 1
PHILLIPS HEAD SCREW ................................................. 1
HEX. HEAD FLANGE BOLT .......................................... 38
7