background image

1.

Do not operate this machine without either a filter

bag or filter cartridge properly installed on the unit.

2.

Keep the work area well lit, clean and free of debris.

3.

Do not handle the electrical plug with wet hands.

4.

Do not use this unit outdoors or near wet surfaces.

5.

Always turn on the dust collector before starting the
dust producing machine. Always turn off the dust pro- 

 

ducing machine before turning off the dust collector.

6.

Do not vacuum anything that is burning, smoking or
smoldering such as cigarettes, matches or hot ashes.

7.

Stay alert!

 

Give your work your undivided attention.

Even a momentary distraction can lead to serious
injury.

8.

Fine particulate dust is a carcinogen that can be

haz-ardous to health. Work in well ventilated area and 

wear eye, ear and respiratory protection devices.

9.

Do not wear loose clothing, gloves, bracelets, neck- 

 

laces, or other jewelry.

10.

 Do not vacuum or use this dust collector near flamma- 

 

ble or combustible liquids, gases, gasoline or other
fuels, lighter fluid, cleaners, oil or solvent based paints,  
natural gas, hydrogen or explosive dusts like coal dust,  
magnesium dust, grain dust or gun powder.

11.

Do not operate this dust collector when tired, distrac- 

 

ted or under the effects of drugs, alcohol or any
medication that impairs reflexes or alertness.

12.

Do not operate the unit until a dust hose is installed
onto the hose inlet.

13.

Never leave the machine unattended while running or

with the power on.

14.

 To avoid health hazards from vapors or dusts, do not

vacuum toxic material.

15.

Do not insert hands or fingers or any foreign objects
into ventilation inlet and outlet openings.

16.

Childproof and tamper proof your shop and all
machinery with locks, master electrical switches and
switch keys to prevent unauthorized or unsupervised
use.

17.

Keep children and visitors at a safe distance when the
unit is running. Do not permit them to use the machine.

18.

 Use only recommended accessories. Use of acces- 

 

sories NOT recommended by 

General

®

 International

may result in a risk of injury or damage to the 

 

 machine.

19.

Make sure the unit is properly grounded. If equipped
with three-prong plug, it should be plugged into a
three-pole receptacle. Never remove the third-prong.

20.

 Always disconnect the unit from the power source

before servicing, performing any maintenance or
repairs and when changing bags or hoses, or if the
machine will be left unattended.

21.

 Do not use this dust collector for any purpose other

than it is intended use. If used for other purposes,

GENERAL® INTERNATIONAL

 disclaims any real or im- 

 

plied warranty and holds itself harmless for any injury,  
which may result from that use.

22.

 Clean filters (bags on 10-105 or cartridges 10-105CF)

on a regular basis and replace as needed. 

Rules for Safe Operation

To help ensure safe operation, please take a moment to learn the machine’s applications and limita-

tions, as well as potential hazards. General® International disclaims any real or implied warranty and 

holds itself harmless for any injury that may result from improper use of its equipment.

Summary of Contents for 10-105 M



















Reviews: