General 10-1000, Manual

Page: 3 / 16

19. NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the fan blade is
accidentally contacted.
20. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged
should be carefully checked to ensure that it will operate properly and perform its intended function-
check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A guard or other part that is damaged should be properly
repaired or replaced.
21. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a
complete stop.
22. DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drugs, alcohol or
any medication.
23. MAKE SURE TOOL IS DICONNECTED FROM POWER SUPPLY while motor is being mounted, connected
or reconnected
WARNING: This product can expose you to chemicals including lead which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
http://www.p65warnings.ca. gov.
WARNING: Drilling, sawing, sanding or machining wood products generates wood dust and other
substances known to the State of California to cause cancer. Avoid inhaling dust generated from wood
products or use a dust mask or other safeguards for personal protection. Wood products emit chemicals
known to the State of California to cause birth defects or other reproductive harm. For more
information go to http://www.p65warnings.ca. gov/wood.