General 10-1000, Manual

Page: 8 / 16

Assembly
CAUTION
:
THERE IS NO ASSEMBLY REQUIRED FOR THE #10-
1440 AIR FILTRATION UNIT. Remove unit from the
box.
OPERATING INSTRUCTIONS:
1) Plug unit into power source.
2) To turn unit ON/OFF, Press I/O button.
3) To run in “AUTO” mode , using the
infrared sensor, PRESS “AUTO” once unit
is on. The unit will turn on once it senses
particulates in the air and filter, once air
is cleaned, it will shut off.
4) To run in “MANUAL” mode, press “ FAN ”
once unit is on, and adjust fan speed,
LOW, MEDIUM or HIGH, by pressing the +
or
– button for desired fan speed.
5) To set timer,1-12 hours, press “TIME” ,
button once unit is on, then press + to
increase hours & - to decrease hours,
until desired number of hours comes up
on screen. Unit will run then shut off at
set time.
6) When running time hits pre-set value, the
display screen will light up indicating the
filter(s) need cleaned/changed. Once
cleaned/changed, press “FILTER” button
to reset preset value (Time).
User can also clean filter before indicator
light comes on. SEE “Cleaning Filters”.